Differences

This shows you the differences between two versions of the page.

--- admin_functionality:settings:set_attribute_groups [2018/07/23 12:41]
conor.doyle
+++ admin_functionality:settings:set_attribute_groups [2021/07/06 09:22] (current)
conor.doyle
@@ Line 1: / Line 1: @@
-====== Set Attribute Groups ======
+====== Match Groups ======
 ----
 ===== Single Entity Configuration =====
-The settings applied in this section will allow you to define the ‘Attribute Groups’. These groups can then be populated with the relevant 'Entity Attributes' which will be used for matching. After clicking on ‘Set Attribute Groups’ under ’Settings’, you will be able to navigate to the screen below.
+The settings applied in this section will allow you to define the ‘Match Groups’. These groups can then be populated with the relevant 'Entity Attributes' which will be used for matching. After clicking on ‘Match Groups’ under ’Settings’, you will be able to navigate to the screen below.
-{{ :admin_functionality:settings:2.png?nolink&600 |}}
+**NOTE:** It is only possible to use one 'Entity Attribute' at one time.
+{{ :admin_functionality:settings:match_groups_settings.png?800 |}}
+**Entity Type:** For this incidence select 'Single Entity' from the drop-down.
 **Select Entity:** Select from the ‘Select Entity’ drop-down to view the respective ‘Entity Attributes’ and ‘Attribute Group Configuration’ settings. You should be able to select from one of the following Entities:
@@ Line 19: / Line 23: @@
   * Schema Name
-{{ :admin_functionality:settings:3.png?nolink&600 |}}
+Hover over the ‘Account Entity Attributes’ heading and a drop-down will appear. This allows you to sort the attributes in ASC or DESC order. This can also be toggled by clicking on the headings. Hover the mouse over the Attributes Icon and you will be able to view the attribute name type. If the attributes are listed by ‘Display Name’, you can view the ‘Schema Name’ by hovering the mouse over the attribute name and vice-versa.
-**Entity Attributes -** Displays the list of all the attributes of a selected entity, providing:
+{{ :admin_functionality:settings:schema_searchv3.png?400 |}}
-  * Attribute Icon
-  * Attribute Name
-Hover over the ‘Account Entity Attributes’ heading and a drop-down will appear. This allows you to sort the attributes in ASC or DESC order. This can also be toggled by clicking on the headings. Hover the mouse over the Attributes Icon and you will be able to view the attribute name type. If the attributes are listed by ‘Display Name’, you can view the ‘Schema Name’ by hovering the mouse over the attribute name and vice-versa.
+You can search for a specific attribute by using a Keyword Search feature. Please note - If the attributes are listed by ‘Display Name’, you can only search by the keywords from ‘Display Name’ and not by the keywords for ‘Schema Name’ and vice-versa. You will be able to drag and drop the attributes under any Attribute Group. However, 'Attribute Groups' can only be used once.
-{{ :admin_functionality:settings:4.png?nolink&300 |}}
+----
+===== Across Entity Configuration (Dynamics ONLY) =====
-{{ :admin_functionality:settings:5.png?nolink&300 |}}
+This functionality allows you to cross compare entities for duplicate records. There are a few small changes to be made in the setup but the fundamental functions are the same as a single entity configuration.
+**Entity Type:** For this incidence select 'Across Entity' from the drop-drop.
-You can search for a specific attribute by using a Keyword Search feature. Please note - If the attributes are listed by ‘Display Name’, you can only search by the keywords from ‘Display Name’ and not by the keywords for ‘Schema Name’ and vice-versa. You will be able to drag and drop the attributes under any Attribute Group. However, Attribute Groups can only be used once.
+**Source Entity:** Select 'Lead' Entity as this will be the entity from which you will be using to check for duplicates in the target entity.
-{{ :admin_functionality:settings:6.png?nolink&600 |}}
+**Target Entity:** Select either 'Account' or 'Contact' for the entity which you want to use for checking against your source
+{{ :admin_functionality:settings:cross_entity.png?800 |}}
 ----
-==== Attribute Group Configuration ====
+===== Match Group Configuration =====
 **Attribute Groups:** Displays the list of groups added with their attributes shown below. You can change the order of groups and attributes via a ‘drag and drop’ function. When moving groups, associated attributes will also be moved. The mouse hover tool tip will display the ‘Schema Name’ and vice-versa.
-**Priority:** You can set the ‘Priority’ for each group with a double click on the drop-down selection. The 'Priority' is used to select the weighting for the match group. 'Priority' drop-down has five values:
+=== Priority ===
-  * ‘Exact’
+It is important to define our match group weighting when selecting our match groups. Select the 'Priority' drop down and select from a range of weighting options.
-  * ‘Very High’
-  * ‘High’
-  * ‘Medium’
-  * ‘Normal’
-**Match Key:** You can set the ‘Match Key’ for each group with the help of drop-down selection. The 'Match Key' is used to select an algorithm for phonetic match token generation. The 'Match Key' drop-down will have six values:
+{{ :admin_functionality:settings:priorityv3.png?200 |}}
-  * ‘DQ Fonetix’, - Recommended
+  *Exact - Must be exactly the same, string to string for a match to be found
-  * ‘DQ Metaphone’ – DQ Enhanced Metaphone
+  *Very High - 0.8 weighting on your match group
-  * ‘DQ Soundex’ – DQ Enhanced Soundex
+  *High - 0.6 weighing on your match group
-  * ‘Metaphone’
+  *Medium - 0.4 weighting on your match group
-  * ‘Soundex’
+  *Normal - 0.2 weighting on your match group
-  * ‘No MatchKey’
-**Include for Matching:** With the help of a checkbox feature, you can configure the ‘Include for Matching’ to select the attributes to be used for matching purposes. By default, the group is included for matching. You do have the option to uncheck the group and mark it as excluded. The groups which are not included for matching are still used for percentage scoring.
+A weighting a can be applied to individual match groups dependant on the importance of your matching attributes.
-----
+=== Scoring ===
-==== Miscellaneous Functions ====
-  * **Select Group:** Clicking on this icon, you will be able to select an Attribute Group. A pop-up will open where a list of pre-defined groups will appear. You can then select attribute group(s) and click on the ‘Add’ button.
+On the right hand side of the Match group settings page you will see a toggle for 'Include for Matching'. If this toggle is activated, these attributes will be fed to our match engine. If unselected , these attributes will not be used for matching, but WILL be included for scoring purposes. EG. If email was used for matching but First Name and Last Name were not then you might get a scenario as follows:
-{{ :admin_functionality:settings:tick.png?nolink&75 |}}
+Email fields match because they are both "sales@test.com", however because we used First Name and Last Name for scoring, Bob Smith will not match with Jessica Howes. Scoring is therefore an important element when returning legitimate duplicate records.
-{{ :admin_functionality:settings:7.png?nolink&300 |}}
+{{ :admin_functionality:settings:include_for_matching.png?150 |}}
-  * **Expand/Collapse All:** You can use these buttons to ‘Expand All’ and ‘Collapse All’ attribute groups.
+----
+===== Miscellaneous Functions =====
-{{ :admin_functionality:settings:expand2.png?nolink&75 |}}
-{{ :admin_functionality:settings:retract.png?nolink&75 |}}
-  * **Delete:** You can select attribute group(s) or attribute(s) and then highlighted group(s)/attribute(s) can be removed by selecting:
-{{ :admin_functionality:settings:delete.png?nolink&75 |}}
-  * **Refresh:** Refresh button will be used to refresh the page manually.
+These functions will allow you to navigate the DQ for Dynamics/Workbooks application. They are as follows:
-{{ :admin_functionality:settings:refresh.png?nolink&75 |}}
+  - Expand All - Expand all groups to see attributes, transforms, display attributes etc.
+  - Add Group - Add a Match Group, Transform Group, Display Group.
+  - Delete - Delete a rule set or multiple rule sets
+  - Refresh - Refresh the rules displayed on the screen displayed
-  * **Save:** You must click the ‘Save’ button to save changes.
-{{ :admin_functionality:settings:save.png?nolink&50 |}}
+{{ :admin_functionality:settings:functions.png?200 |}}
-  * **Reset:** You can also click on the ‘Reset’ button before clicking the ‘Save’ button. The ‘Reset’ button can be used to revert these changes.
-{{ :admin_functionality:settings:reset.png?nolink&50 |}}

DQ for Dynamics™/DQ for Workbooks Wiki

User Tools

Site Tools

Differences

Page Tools